亚洲国产欧美专区,亚洲av性色国产日韩在线播放,亚洲av日韩av一道本香蕉

ANSUL防火產品于1939年推出市場，其中包括*個筒式干粉滅火器。隨著技術的改變和危險的新危險的出現，ANSUL的產品工程師與許多行業攜手合作，保護他們的人身和財產免受火災。今天，ANSUL消防技術中心和中心是世界上zui廣泛的消防研究和測試設施之一。沒有其他防火品牌得到廣泛的廣泛的研究和測試設施的支持，許多科學家和工程師致力于100％的時間準備未來的防火和安全需求。

ANSUL消防學校每年都會使用各種滅火劑，在便攜式和固定式消防設備的實際消防基礎上，為世界各地的數百名客戶提供培訓。自1940年以來，已經為航空，采礦，石油天然氣，化工，公用事業，消防和金屬加工等高危險，高危險行業提供了數千名首要應急人員。

授權ANSUL經銷商定期參加激烈的產品培訓計劃，在ANSUL滅火設備的設計，安裝和服務中進行指導和測試。這不斷開發經驗豐富的授權分銷商網絡，由專業的現場銷售代表和專業的技術和客戶服務人員支持。

Ansul HF Electric Actuator (73327) details:

Electric actuation of an agent cylinder and/or selector valves is accomplished by an HF electric actuator interfaced through an Autopulse Control system. This actuator can be used in hazardous environments where the ambient temperature range is between -18 to 54 degree C. The HF electric actuator meets the requirements of N.E.C Class 1, Div 1, Groups B, C, D and Class II, Div 1, Groups E, F, G. 12VDC 0.57A . The HF actuator fits on the ANSUL hi flow valve or a CV-90 valve and if manual actuation is needed use manual release lever - part number 70846. IF HF actuator is needed for a CV-98 valve then use a CV-98 booster.

The HF electric actuator meets the requirements of N.E.C. Class I, Div. 1, Groups B, C, D and Class II, Div. 1, Groups E, F, G. A maximum of two HF electric actuator scan be used on a single AUTOPULSE release circuit. When utilizing only one HF electric actuator, an in-line resistor, Part No. 73606, is required in the supervised release circuit.

Ansul HF Electric Actuator (73327) specifications：

Nominal Rated Voltage

Voltage Minimum Maximum

12 VDC @ 0.57 amps 10.4 VDC* 14.0 VDC

In auxiliary or override applications, a manual-local override valve actuator or a manual cable pull actuator can be installed on top of the HF electric actuator by removing the safety cap.

An arming tool is required to reset the actuator after operation. The actuator contains a standard 1/2 in. Threaded female straight connector for electrical conduit hookup.